Electrode BNC Type with 1 m. cable.
OE-150-16 single cylinder ORP
electrode that allows you to connect the BNC socket
directly into the input terminal of ORP meter or ORP
controller or any ORP device that has a BNC input
terminal. This replaceable ORP electrode gives you the
flexibility to measure a solution in a container as far
as 1 meter from the device. It precisely determines the
redox tension of the intended solution to be measured to
help you determine the status of your tanks, ponds,
pools, spas, etc.
Once your new ORP electrode probe is connected to
the electrode input terminal, calibrate it first with
the calibration (buffer) solutions before using the
newly replace ORP electrode.
This can be used for general water applications
such as drinking, domestic and rain water, aquariums,
plus its compatible with hand-held meters or controllers
with BNC provisions.
Easy monitoring of pH accurately plus the values can be
achieved within few seconds
Provides HIGH & VERY ACCURATE MEASUREMENTS
APPROVED BY STRICT QUALITY AND SAFETY STANDARDS that
and trouble-free life that can be transported easily
Reliable, stable, transportable and it's very simple and
very comfortable to install and use
Measuring Range: 0 to ±1999mV
Accuracy: ±0.1% F·S±1 digit
Cable Length: 1m long
Connection: 1m cable with BNC socket
หัววัดโออาร์พี สำหรับเครื่องวัดโออาร์พี แบบข้อต่อชนิด
BNC สายยาว 1 เมตร