| |
|
INTRODUCTION :
PH8690
is a professional ph meter designed to measure pH levels from 0~14
coupled with high sensitivity, fast response, and good repetition
sensor. This easy to operate ph meter features its technical advances
such as:
- Professional pH meter with
very high accuracy
- All push button operation,
automatic or manual calibration. All you
need is just press
1 key & the meter will automatically to
calibrated (pH4.0, pH7.0 & pH10.0). It
can also be
calibrated manually and change
the sequence of calibration points and increase or
decreased the value to calibrate
with other calibration solutions.
- IP67 -
100% waterproof
& dustproof. Totally protected against dust and
effects of immersion up to 1m
-
Replaceable
pH electrode. electrode can be easily replaced with a new one,
you don't have to buy the whole ph
meter
-
Dual
display (pH & temp) & switchable °C & °F. you can switch from
°C
to °F and vice versa
- Automatic temperature compensation (ATC).
The meter automatically adjust
current temperature of the
environment because even the slightest change in
temperature
affects the accuracy of reading
results
- Out-of-Range indicator.
Alerts the user whenever solution/liquid is extremely acidic or
too alkaline.
- Data hold.
Freezes the reading for comfortable recording of results
- Esy battery replacement &
low battery indicator.
Batteries
are easily to replaced,
just
slide in the batteries to the
compartment and indicator keeps the user always informed,
mobility is no longer a problem.
- Auto power off.
this feature can easily be disable anytime
PH8690 is also design to be submerged in water or liquid solution to
test and monitor the pH level of the solution to be tested or monitor.
With its IP67 Ingress Protection Rating, you are assured that it is 100%
WATERPROOF & TIGHTLY SEALED to prevent water or liquid not even a small
amount to leak inside the meter to ensure the 100% accuracy of this
unit.
The
meter is designed with an adjustable calibration point to meet different
calibration solution standards, from USA buffers to NIST buffers and DIN
buffers.
Wide Range of Application: Pools, Aquariums,
Labs, Aquaculture, Car washes, Water testing, Waste water treatment and
many more applications that require pH measurement!
Standards & Compliance:
It bears the
CE marking
that
certifies that every single component of PH8690 comply with the
essential health standards and safety requirements set out by the
European Directives,
thus
your safety while using the
PH8690 is
assured. The meter also bears a serial number for highly
quality controlled production.
Indeed this is the PH Meter that have more value for your money!
-
100% Water and Dust Proof
-
Automatic & Manual Calibration with just a single push of a
button
-
pH & Temperature display with switchable
°C & °F
-
Large display screen
-
Replaceable Electrode
-
Patented Design
-
professional pH Meter with very high accuracy
FEATURES
:
-
Professional pH Meter with very high accuracy
-
IP67 waterproof & dustproof housing
(totally protected against dust and water even on immersion
up to 1m)
-
Replaceable pH electrode
-
Automatic & Manual Calibration with just a
push of a button
-
Easy 3 points Calibration (pH 4.00,
7.00,10.00)
-
Display Temperature & pH simultaneously
-
Automatic Temperature Compensation (ATC)
-
Easy to switch between °C and °F
-
Patented design
-
Can measure alkaline solution
-
Data Hold & ATC
-
Auto Power off that can be disable
-
Easy read to 45°angle shape for increased readability
-
All push button operation
-
Portable design with pocket clip
-
Easy probe replacement and assemble
-
No tools or trimmers needed for calibration
-
With Low battery, Over range and Calibration indicators
-
Easy to replace and assemble with new battery
-
High quality and accurate testing results are guaranteed
-
Approved by strict quality and safety standards.
|
|
|
วัดค่า
ดูวิธีการสั่งซื้อ
